Toro Multi Pro 1200 - Rate Check and Range Calculation; Performing Rate Checks and Calculating Application Range

76
Gallons Per 1,000 sq. ft.
Average 1 x .95 = ÷ 43.56 = = -5% G.P. 1,000 sq. ft.
Average 1
x 1.05 = ÷ 43.56 = = +5% G.P. 1,000 sq. ft.
(GPA Range) (GP 1,000 sq. ft. Range)
#1 oz/GPA
#2 oz/GPA
#3 oz/GPA
#4 oz/GPA
#5 oz/GPA
#6 oz/GPA
#7 oz/GPA
#8 oz/GPA
#9 oz/GPA
#10 oz/GPA
#11 oz/GPA
Total
÷11
Average 1 GPA
#1 oz/GPA
#2 oz/GPA
#3 oz/GPA
#4 oz/GPA
#5 oz/GPA
#6 oz/GPA
#7 oz/GPA
#8 oz/GPA
#9 oz/GPA
#10 oz/GPA
#11 oz/GPA
Total
÷11
Average 1 GPA
Your GPA Application Rate must fall within the
GPA Range
Your GP 1,000 sq. ft. Application Rate must fall within the GP 1,000 sq. ft. Range
Park Vehicle. SET PARKING BRAKE.
Turn on pump and all booms and maintain
GPA with Test Speed (predetermined).
Hold a graduated cylinder under the far left nozzle on the left boom. Collect the output for the same
amount of time that it took to travel 204 ft.
Each ounce of fluid collected equals a 1 gallon per acre application rate.
Repeat collection test twice for each nozzle record amount collected each test below.
Proceed through each column separately and completely.
Each Nozzle Should Be Within ± 5% Of The Average Of All Nozzles
Replace Each Nozzle Not ± 5% Of The GPA Average Range
Replace All Nozzles If Two or More Are Not Within The ± 5% GPA Range
Gallons Per Acre:
Average 1 x .95 = = -5%
Average 1 x 1.05 = = +5%
(GPA Range)
CALCULATE RANGE
Rate Check (Contd)
Both Averages Should Be Within 5% Of Each Other