Toro Multi Pro 1250 - Page 67

67
FIG. 2
OPERATION:
The Spray Pro

monitor features a large, easy-
to-read liquid crystal display, with lighted display,
and panel lighting for night use. To get a readout
of any of the monitored functions, turn the rotary
dial to the desired item. The monitor gives a
continuous readout of the function selected until
another one is chosen.
EXAMPLES:
To monitor current application rate, turn the dial
to APP RATE.
To display your speed in miles per hour
(kilometers per hour), turn the dial to SPEED.
To measure distance in feet (meters), turn the dial
to DISTANCE.
For a read out of the total number of gallons
(liters) that have been applied, turn the dial to
TOTAL VOLUME.
1791-1-1250
SPRAY PRO

OPERATION
OVERFLOW MESSAGE:
If the display message OFL appears during
distance, area or volume liquid measurement, it
indicates that the readouts capacity to display
information has been exceeded, and the affected
function must be reset to 0 to continue
counting.
RESETTING COUNTERS:
To reset an AREA, VOLUME, or DISTANCE
counter, turn the dial to the appropriate item and
press the
button for approximately three
seconds, until the displays read out returns to
zero.
If either the TOTAL AREA or TOTAL VOLUME
counters are reset, the other is reset also. If either
the SUB AREA or SUB VOLUME counters are
reset, the other is reset also.
TOTAL AREA
SPEED
UNITS
OF MEASURE
APP. RATE
TOTAL VOLUME
SUB
VOLUME
DISTANCE
SUB AREA
SEL
UNITS
TEST
SPEED
BOOM
SEL
WIDTH
SPEED
CAL
FLOW
CAL
RESET
CAL
-
+
SPRAY PRO
2.2
NOTES: