Toro Multi Pro 5800 - Page 20

g207640
Figure50
1.Flangelocknuts(5/16
inch)
3.Bracket(lift-cylinder
manifold)
2.Lift-cylindermount4.Flange-headbolts(5/16x
1inch)
5.Aligntheholesinthespeed-signbracket,
lift-cylindermanifoldbracket,andlift-cylinder
mount(Figure51).
g207639
Figure51
1.Flangelocknuts(5/16
inch)
4.Bracket(speedsign)
2.Lift-cylindermount5.Flange-headbolt(5/16x
1inch)
3.Bracket(lift-cylinder
manifold)
6.Assemblethespeedsignbrackettothecylinder
manifoldbracketandlift-cylindermount(Figure
51)with2ange-headbolts(5/16x1inch)with
the2angelocknuts(5/16inch).
7.Torquetheboltsandnutsto1978to2542N∙cm
(175to225in-lb).
20