Toro Multi Pro 5800 - Filling the Fuel Tank; Using the InfoCenter

g208653
Figure66
2017machineshown;2016machinesaresimilar
1.Undercarriageshroud
3.Flange-headbolts(5/16x
7/8inch)
2.Washers(5/16inch)4.Frontofthemachine
5.Assembletherearpartoftheundercarriage
shroudtothechassis(Figure66)withthe
hardwarethatyouremovedinstep1of
RemovingtheUndercarriageShroud(page4)
asfollows:
•2016machines—7ange-headbolts(5/16
x7/8inch)and7washers(5/16inch)
•2017andlatermachines—5ange-head
bolts(5/16x7/8inch)and5washers(5/16
inch)
6.Torquethenutsandboltsto1129to1582N∙cm
(100to140in-lb).
InstallingtheForward-HeatShield
1.Aligntherearangeoftheforwardheatshield
overtheforwardangeoftherearheatshield
(Figure67).
g028177
Figure67
1.Frontofthemachine3.Rearange(forwardheat
shield)
2.Hex-headboltsand
washers
4.Forwardange(rearheat
shield)
2.Aligntheholesintheforwardheatshieldwith
thethreadedholesinthechassis(Figure67).
3.Assembletheforwardheatshieldtothemachine
withthe6hex-headboltsand6washers(Figure
67)thatyouremovedinstep3ofRemovingthe
ForwardHeatShield(page3).
4.Torquetheboltsto1978to2542N∙cm(175to
115in-lb).
5.Removethejackstandsandlowerthemachine.
26