Toro multicycle 20636 - Unfolding the Handle; Filling the Engine with Oil

Setup
1.UnfoldingtheHandle
Procedure
1.Unlockthehandlelocks,movethehandlesections
intotheoperatingposition,andlockthehandlelocks
(Figure3).
Figure3
2.Unlocktheupperhandlelocksandrotatetheupper
handleupwardandlockitintoapositionthatis
comfortabletoyou(Figure4).
Figure4
1.Highestposition3.Lowestposition
2.Middleposition
Note:Youcansettheupperhandleto1of3handle
positions.Lineupthemarktooneofthe3markson
theinnersideoftheupperhandlelocks(Figure4).
Note:Ifahandleleverisloose,openthelever,
rotateitclockwise1or2turnstotightenit,then
closethelever(Figure5).
Figure5
2.FillingtheEnginewithOil
Procedure
Yourmowerdoesnotcomewithoilintheengine.
1.Removethedipstick(Figure6).
Figure6
2.Slowlypouroilintotheoillltubeuntiltheoillevel
reachestheFullmarkonthedipstick(Figure6).
Donotoverll.(Max.ll:0.59l,type:SAE30
detergentoilwithanAPIserviceclassicationofSF,
SG,SH,SJ,SL,orhigher.)
3.Installthedipsticksecurely.
Important: Change the engine oil after the r st
5 operating hour s ;changeityearlythereafter.
RefertoChangingtheEngineOil.
5