Toro multicycle 20636 - Installing the Fuse; Charging the Battery; Product Overview

3.InstallingtheFuse
Procedure
Model20638only
Yourmowercomeswitha40-ampfusethatprotectsthe
electricstarter.
Important:Youcannotstartthemowerwiththe
electricstarterorchargethebatteryunlessyou
installthefuse.
1.Removethebatterycoverandthebatteryandlocate
thefuseholder(Figure7).
Figure7
1.Screw
3.Fuseholder
2.Batterycover4.Battery
2.Insertthefuse(fromtheloosepartsbag)intothe
fuseholder(Figure8).
Figure8
Note:Yourmowercomeswithafuseintheowner’s
packetandanotherfuseinthebatterybox.
3.Installthebatteryandthebatterycover.
4.ChargingtheBattery
Procedure
Model20638only
RefertoChargingtheBatteryintheMaintenance
section.
ProductOverview
Figure9
Model20638shown
1.Lowerhandlelock
9.Oilll/Dipstick(notshown)
2.Grassbag
10.Fueltankcap
3.Upperhandlelock
11.Cuttingheightlever(2)
4.Recoilstarthandle
12.Sparkplug
5.Upperhandle(Models
20637and20638only)
13.Primer
6.Bladecontrolbar
14.Airlter
7.Electricstart(model20638
only)
15.Recycling/bagginglever
8.Reardoor
6