Toro Power Max 826 OE - Engine runs, but the machine discharges snow poorly or not at all.; Discharge chute either does not lock into place or does not move.; The machine does not properly clear the snow off the surface.

Problem
PossibleCauseCorrectiveAction
1.ThethrottleisnotintheFASTposition
whenthrowingsnow.
1.MovethethrottletotheFASTposition.
2.Themachineismovingtoofasttoclear
thesnow.
2.Shiftthemachineintoalowergear.
3.Youaretryingtoremovetoomuch
snowperswath.
3.Reducetheamountofsnowremoved
perswath.
4.Youaretryingtoremoveextremely
heavyorwetsnow.
4.Don'toverloadthemachinewith
extremelyheavyorwetsnow.
5.Thedischargechuteisplugged.5.Unclogthedischargechute.
6.Theauger/impellerdrivebeltisloose
orisoffthepulley.
6.Installand/oradjusttheauger/impeller
drivebelt;refertowww.T oro.com
forservicinginformationortakethe
machinetoanAuthorizedService
Dealer.
Engineruns,butthemachinedischarges
snowpoorlyornotatall.
7.Theauger/impellerdrivebeltisworn
orbroken.
7.Replacetheauger/impellerdrivebelt;
refertowww.Toro.comforservicing
informationortakethemachinetoan
AuthorizedServiceDealer.
Dischargechuteeitherdoesnotlockinto
placeordoesnotmove.
1.Thedischarge-chutelatchisnot
properlyadjusted.
1.Adjustthedischarge-chutelatch.
1.Theskidsand/orscraperarenot
properlyadjusted.
1.Adjusttheskidsand/orthescraper.
Themachinedoesnotproperlyclearthe
snowoffthesurface.
2.Thepressureinthetiresisnotequal.
2.Checkandadjustthepressureinone
orbothtires.
24