Toro PowerPlex 51491 - Operation; Starting the Hedge Trimmer; Rotating the Hedge Trimmer Handle; Shutting Off the Hedge Trimmer

Operation
StartingtheHedgeTrimmer
1.Removetheprotectivecoverfromtheblades
(Figure4).
WARNING
Thehedgetrimmerbladescancause
cutsoramputation.
Becarefulwhenhandlingthehedge
trimmerwiththeprotectivecover
removed.
g203890
Figure4
1.Protectivecover2.Blades
2.Makesurethattheventsonthehedgetrimmer
areclearofanydustanddebris.
3.Alignthecavityofthebatterypackwiththe
tongueinthehandlehousing,graspthehandle,
andpushthebatterypackintothehandleuntil
thelatchlocksintoplace(Figure5).
g228569
Figure5
1.Auxiliary-handleswitch4.Trigger
2.Auxiliaryhandle5.Batterylatch
3.Lockswitch6.Hedgetrimmerventing
areas
4.Place1handonthetriggerhandle.Placethe
otherhandontheauxiliaryhandle(Figure5).
5.Pressthelockswitchandthensqueeze
thetriggerswitchwhileengagingthe
auxiliary-handleswitchtoturnonthehedge
trimmer(Figure5).
Thetrimmerstaysonaslongasthe
auxiliary-handleswitchisengagedandthe
triggerissqueezed.Youmayreleasethe
lockswitchoncethehedgetrimmerisrunning
(Figure5).
RotatingtheHedgeTrimmer
Handle
1.Pressandholdtherotationallockbutton(Aof
Figure6).
2.Rotatethehandle90°totherightorleft
dependingondesiredcuttingdirection,then
releasetherotationallockbuttontolockthe
handleinthedesiredposition(BofFigure6).
g190070
Figure6
ShuttingOfftheHedge
Trimmer
Toshutoffthehedgetrimmer,releasethetrigger,
auxiliary-handleswitch,orboth(Figure5).Allowat
least5secondsforthecuttingbladetostopmoving.
Wheneveryouarenotusingthetrimmerorare
transportingthetrimmertoorfromtheworkarea,
removethebatterypack.
9