Toro ProForce Debris - Nozzle Assembly Service

PRELIMINARY – For Toro Distributor and Toro Company use only.
ProForce Debris BlowerPage 5 − 14Blower Assembly
Nozzle Assembly
1. Nozzle
2. Nozzle clamp
3. V belt
4. Housing assembly
5. Flat washer (10 used)
6. R−clamp
7. Nozzle motor
8. Motor bracket
9. Cap screw (3 used)
10. Drive pulley
11. Lock nut
12. Cap screw (2 used)
13. Belt guard
14. Flang head screw (2 used)
15. Flat washer (2 used per bearing)
16. Cap screw
17. Flange nut (2 used)
18. Flange nut
19. Leaf spring
20. Bearing
21. Cap screw (2 used)
22. Flange nut (2 used)
23. Shoulder bolt
24. Lock nut
25. Nozzle pulley
26. Nozzle guide (4 used)
27. Lock nut
28. Socket head screw
Figure 11
FRONT
RIGHT
1
3
2
6
4
15
16
18
20
7
8
9
10
11
12
13
14
17
19
20
21
22
23
15
5
24
16
20
25
26
28
27
45 to 50 in−lb
(5.1 to 5.6 N−m)
NOTE: For service information on the nozzle motor
(item 7), refer to the Service and Repairs section of
Chapter 4 − Electrical System.