Toro ProForce Debris - Wheel Hubs and Bearings Service

PRELIMINARY – For Toro Distributor and Toro Company use only.
ProForce Debris BlowerPage 6 − 6Chassis
Wheel Hubs and Bearings
Figure 3
1. Axle (2 used)
2. Grease seal
3. Bearing cone (2 used per axle)
4. Bearing cup (2 used per axle)
5. Wheel hub
6. Lug screw (4 used per hub)
7. Tab washer
8. Nut retainer
9. Flange nut (3 used per axle)
10. Cotter pin
11. Jam nut
12. Dust cap
13. Carriage screw (3 used per axle)
See text for
tightening procedure
1
6
7
3
2
5
4
8
9
10
11
12
3
FRONT
RIGHT
13