Adjusting the Cutting Height
DANGER
Adjusting the cutting-height levers could bring your hands into contact with a moving blade
and result in serious injury .
• Shut off the engine and wait for all moving parts to stop before adjusting the cutting height.
• Do not put your ngers under the housing when adjusting the cutting height.
CAUTION
If the engine has been running, the mufer will be hot and can burn you.
Keep away from the hot mufer .
Adjust the cutting height as desired. Set all wheels to the same cutting height ( Figure 12 ).
g451640
Figure 12
12
To Next Page
Loading...
