Folding the Handle
W ARNING
Folding or unfolding the handle improperly can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or unfolding the handle.
• If a cable is damaged, contact an Authorized Service Dealer .
1. Hold the handle while disengaging the handle locks to avoid pinching your hands.
2. Disengage the handle locks until you can move the upper handle freely (A of Figure 19 )
3. Fold the handle forward to the fully forward position (B of Figure 19 ).
Important: Route the cables to the outside of the handle locks as you fold the handle.
g334367
Figure 19
4. T o unfold the handle, refer to 1 Unfolding the Handle ( page 5 ) .
17
To Next Page
Loading...
