Toro Reelmaster 5410 - Page 80

RemovingtheRadiator(continued)
Carefullypositionthecoolantreservoirandreservoirbracketawayfromthe
fanshroud.
13.Ontheleftsideofthemachine,removethe2button-headscrews(item29in
Figure33)and2angenutsthatsecurethefanshroudtotheradiatorframe.
14.Removethe14ange-headscrews(item6inFigure33)thatsecurethe
fanshroudtotheradiator,andradiatortotheradiatorframe.Positionthe
fanshroudawayfromtheradiator.
15.Carefullyremovetheradiatorandoilcoolerassemblyfromthemachine.
16.Ifnecessary,removethe2straighthydraulicttingsfromtheoilcoolerand
discardtheO-rings.
17.Coverorplugtheopeningsinoilcooleranddisconnectedcoolantand
hydraulictubestopreventcontaminationfromenteringthesystem.
18.Inspectallfoamsealsontheradiator,fanshroud,andradiatorframe.
Replaceanyfoamsealsthataredamaged.
InstallingtheRadiator
g189544
Figure34
1.Radiator3.Hydraulictube
2.Straighthydraulictting(2each)
4.Hydraulictube
1.Ifthe2straighthydraulicttings(Item2inFigure34)wereremovedfrom
theoilcooler,lubricateandinstallnewO-ringsontothettings.Installthe
ttingsintotheportopeningsandtightenthettings;refertoInstallingthe
HydraulicFittings(SAEStraightThreadO-RingFittingintotheComponent
Port)(page6–13).
2.Carefullypositiontheradiatorandoilcoolerassemblytotheradiatorframe.
Positionthefanshroudtotheradiator.
3.Securetheradiatortotheradiatorframewiththe7ange-headscrews
previouslyremoved.Positionthefanshroudtotheradiatorwiththe7
fastenerspreviouslyremoved.Ensurethatatleast6.4mm(0.250inch)
clearanceexistsatallpointsbetweenthefanshroudandthefan.
YanmarDieselEngine:ServiceandRepairs
Page4–20
Reelmaster
®
5410/5510/5610Series
15216SLRevC