Toro Reelmaster 5510 - Gear Pump (P3) Flow Test (Using Tester with Flow Meter and Pressure Gauge) (5410;5410-G;5410-D;5510;5510-G;5510-D;5610)

GearPump(P3)FlowTest(UsingTesterwithFlowMeterand
PressureGauge)(5410/5410-G/5410-D/5510/5510-G/5510-D/5610)
g230020
Figure87
Thegearpump(P3)owtestshouldbeperformedtoensurethatthetraction
chargecircuitandsteeringcircuithaveadequatehydraulicow.
TestProcedure
1.Parkmachineonalevelsurfacewiththecuttingunitsloweredand
disengaged.Ensurethattheengineisshutoff.Applytheparkingbrake.
2.ReadallWarning,Cautions,andprecautionslistedatthebeginningofthis
section.
Reelmaster
®
5410/5510/5610Series
Page6–65
HydraulicSystem:TestingtheHydraulicSystem
15216SLRevC