Toro Reelmaster 6500–D - Page 265

Axles, Planetaries
and Brakes
Reelmaster 6500–D/6700–D
Page 6 – 11
Axles, Planetaries and Brakes
T–2071
92–7417
1
2
3
4
5
6
7
8
9
10
11
12
13
Figure 15
1. LH Brake Housing 6. Hair Cotter Pin 11. Actuator
2. Seal 7. Stationary Disc 12. Extension Spring
3. Pull Rod 8. Rotating Disc 13. Ball
4. Clevis Pin 9. Retaining Ring
5. Link 10. Gasket
Brake Inspection and Repair (Fig. 15)
1. Scrape gasket material (10) off of brake housing and
planetary wheel drive mounting surfaces.
2. Remove retaining ring (9).
3. Remove stationary discs (7) and rotating discs (8).
4. Remove springs (12).
5. Remove actuator assembly (11, 6, 5, 4, 3).
6. Remove balls (13).
7. Wash parts in cleaning solvent.
8. Inspect parts for wear or damage.
9. Reverse steps 2 – 6 to assemble brakes, installing
new parts as necessary. Install a new seal (2).
10. Use a new gasket (10) when installing brake assem-
bly.