Greasing the Bearings and Bushings (continued)
Lift arm pivot bushings (1 per cutting unit)
Cutting unit carrier frame (2 per cutting unit)
Cutting unit lift arm pivot (1 per cutting unit)
G452389
Engine Maintenance
Engine Oil Specifications
Oil Type
Use high-quality, low-ash engine oil that meets or exceeds the following service categories:
• API—CJ-4 or higher
• ACEA—E6
• JASO—DH-2
IMPORTANT
Using engine oil other than API CJ-4 or higher, ACEA E6, or JASO DH-2 may cause
the diesel particulate filter to plug or cause engine damage.
Use the following engine oil viscosity grade:
• Preferred oil: SAE 15W-40 [-17°C (above 0°F)]
• Alternate oil: SAE 10W-30 or 5W-30 (all temperatures)
Toro Premium Engine Oil is available from your authorized Toro distributor in either 15W-40
or 10W-30 viscosity grades.
Maintenance: Engine Maintenance Page 6–14 3466-702 A
To Next Page
Loading...
