Toro TIMECUTTER HD 75211 - Page 85

6-5
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
ENGINE
Engine
Toro Twin Cylinder Engine (Cont.)
Removal (Cont.)
10. Disconnect the fuel supply line at the fuel filter (Figure 5).
11. Remove vent line at splice with Toro supplied hose (Figure 6).
12. Disconnect the throttle cable, see “Throttle Control Assembly Removal,” chapter 5, page 5-23.
13. Disconnect the choke cable, see “Choke Control Assembly Removal,” chapter 5, page 5-26.
14. Remove the clutch mounting bolt and washer. Slide the clutch off of the crankshaft.
15. Remove the engine pulley.
16. Remove the engine mounting bolts.
17. Lift the engine away from the frame.
Figure 5
Figure 6