Toro TIMECUTTER HD 75211 - Page 90

6-10
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
ENGINE
Toro Twin Cylinder Engine (Cont.)
Installation (Cont.)
18. Install the hydrostatic drive belt, see “Hydrostatic Drive Belt Installation,” chapter 7, page 7-11.
19. Install the mower belt, see “Mower Belt Replacement,” chapter 3, page 3-15.
20. Install the muffler and new exhaust gaskets.
NOTE: Torque muffler mounting bolts or nuts to 150-170 in-lbs. (17-20 Nm).
20. Install the engine guard.
21. Fill crankcase with approved oil and verify proper oil level.
22. Connect the battery terminals.
23. Lower the unit and verify proper function.
NOTE: Verify Engine speed is set to proper RPM specification for the applicable model (Link to Specs
Chart).