To Next PageTo Next Page
Need help?Do you have a question about the Toro TimeCutter MR4275T and is the answer not in the manual?
General| Cutting Width | 42 inches |
|---|---|
| Transmission | Hydrostatic |
| Blade Tip Speed | 18, 000 FPM |
| Cutting Height | 1.5 - 4.5 inches |
| Speed | Up to 7 MPH |
| Deck Material | Welded Steel |
| Fuel Capacity | 3 gallons |
| Warranty | 3 years limited |
Explanation of symbols used to highlight safety messages.
Essential safety precautions for operating the mower.
Explanation of symbols found on the battery.
Description of the main controls on the dashboard.
Explanation of motion-control levers and seat adjustment.
Details on speed control and fuel level check.
Identifies key parts of the mower using a diagram.
General safety rules for operation.
Procedure for adding fuel to the mower.
Specifications for fuel type.
Guidance on fuel additives.
Procedure to verify interlock functionality.
Adjusting seat and MyRide suspension.
Adjusting height of levers.
Safety rules during machine operation.
How to turn on the mower blades.
How to turn off the mower blades.
Instructions for moving the machine forward.
Lowest speed range for specific uses.
Medium speed range for specific uses.
Fastest speed range for specific uses.
Adjustment for smaller decks.
Adjustment for larger decks.
Tips for optimal cutting and machine care.
Procedures for stopping and cleaning.
How to maintain mower blades.
Safety precautions after operation.
Guidelines for choosing a suitable trailer.
Safety precautions before performing maintenance.
How to access the mower deck.
Procedure for greasing caster wheel bearings.
Safety precautions for engine maintenance.
Cleaning and replacing the air cleaner.
Procedures for spark plug service.
Procedure to replace the fuel filter.
Safety precautions for electrical system.
Procedures for battery removal and installation.
How to check and inflate tires.
Procedure to release the electric brake.
How to correct steering pull.
How to check belts for wear.
Procedure for replacing the mower belt.
Safety precautions for mower blades.
Procedures for blade maintenance.
Procedure to check deck side-to-side balance.
Procedure to clean the mower deck underside.
Safety precautions for storing the machine.
Steps for cleaning and preparing for storage.
Wiring diagram for the machine's electrical system.
Policies on data use, retention, security, and access.
