Toro TITAN Max - Installing the Pivot Assembly; Installing the Hold-Down Rod

11
InstallingthePivot
Assembly
Partsneededforthisprocedure:
1Pivotassembly
1Hairpincotter
Procedure
1.Slidethesquareendofthepivotassembly
throughtheopeningintheleftbaggersupport
andthepostthroughtherightsupport(Figure
24).
g037900
Figure24
1.Pivotassembly2.Hairpincotter
2.Installthehairpincotterintotheposttosecure
thepivotassemblytothebaggersupport(Figure
24).
12
InstallingtheHold-Down
Rod
Partsneededforthisprocedure:
1Hold-downrod
1Hairpincotter
Procedure
1.Installhold-downrodtothepivotassembly
(Figure25).
g037978
Figure25
1.Hold-downrod2.Hairpincotter
2.Usethehairpincottertosecuretherodintothe
pivotassembly(Figure25).
18