Toro TITAN Max User Manual

ClearingObstructionsfrom
theBagger
WARNING
Whenthebaggerisinoperation,theblower
isrotatingandcancutofforinjurehandsand
ngers.
•Beforeadjusting,cleaning,repairing
andinspectingtheblower,andbefore
uncloggingthechute,shutofftheengine
andwaitforallmovingpartstostop.
Removethekey.
•Useastickorsimilarobject,notyour
hands,toremoveanobstructionfromthe
blowerandtube.
•Keepyourface,hands,feet,andanyother
partofyourbodyorclothingawayfrom
concealed,moving,orrotatingparts.
1.Parkthemachineonalevelsurfaceand
disengagethebladecontrolswitch.
2.Movethemotioncontrolleversoutwardtothe
neutrallockposition,stoptheengine,remove
thekey,settheparkingbrakeandwaitfor
allmovingpartstostopbeforeleavingthe
operatingposition.
3.Checkthegrassbagsandemptythemifthey
arefull.
4.Removeandseparatethedischargetubeand
chutefromthebaggertopandmower.Using
astickorsimilarobject,carefullyremoveand
cleartheobstructionfromthemower,discharge
tube,chute,andthebaggertop.
5.Afteryouremovetheobstruction,installthe
completebaggersystemandresumeoperation.
RemovingtheBagger
CAUTION
Failingtoremovethefrontbaggerweights
andoperatingthemachinewithoutthebagger
attachmentmaycauseanunstablecondition,
whichcouldresultinalossofcontrol.
•Alwaysremovethefrontweightswhen
removingthebaggerattachment.
•Neveroperatethemachinewithoutthe
baggerattachmentandthefrontweights
installed.
YoucanremovethebaggerbyrepeatingtheSetup
sectionsfromallinstalledbaggerrelatedkitsin
reverseorder.Ifweightsareinstalled,alwaysremove
thefrontbaggerweightswhenremovingthebagger
attachments.
Note:Itisnecessaryonlytoremovethecutoffbafe
wheninstallingamulchingkit.
25

Toro TITAN Max Specifications

General

Transmission	Hydrostatic
Cutting Width	60 inches
Deck Material	Steel
Engine	Toro
Engine Type	Toro V-Twin