Toro Titan MX6000 - Adjusting the Motion-Control Levers; Pushing the Machine by Hand; To Push the Machine

AdjustingtheMotion-Control
Levers
AdjustingtheHeight
Note:Repeattheadjustmentfortheoppositecontrollever.
Themotion-controlleverscanbeadjustedhigherorlowerfor
maximumoperatorcomfort(Figure26).
g027252
B
A
Figure26
AdjustingtheTilt
Themotion-controlleverscanbetiltedforeoraftfor
maximumoperatorcomfort.
1.Loosentheupperboltholdingthecontrollevertothe
controlarmshaft.
2.Loosenthelowerboltjustenoughtopivotthecontrol
leverforeoraft.Tightenbothboltstosecurethe
controlinthenewposition.
3.Repeattheadjustmentfortheoppositecontrollever.
PushingtheMachinebyHand
Important:Alwayspushthemachinebyhand.Machine
damagecanoccurwhenthemachineistowed.
ToPushtheMachine
1.Parkthemachineonalevelsurfaceanddisengagethe
blade-controlswitch.
2.Engagetheparkingbrake.
3.Movethemotion-controlleversoutwardtoneutral-lock
position,stoptheengine,removethekey,andwaitfor
allmovingpartstostopbeforeleavingtheoperating
position.
4.Locatethebypassleversattherearofthemachine,on
theleftandrightsideoftheframe.
5.Movethebypassleversrearwardandthendownto
locktheminplaceasshowninFigure27todisengage
thewheelmotors.
Note:Ensurethattheleftandrightbypassleversare
rearwardandlockedbeforemovingthemachine.
6.Disengagetheparkingbrake.
Themachineisnowabletobepushedbyhand.
BA
DC
g027642
Figure27
ToOperatetheMachine
Movethebypasstothepositionforoperatingthemachine
(Figure27)toengagethewheelmotors.
24