Toro Titan MX6000 - Hydraulic and Drive System Maintenance

g02441 1
1
2
Figure46
1.Fuseblock
2.30ampmainfuse
Important:Ensurethatthenewfusesarethe
sametypeandamperageasthefusesremoved.
2.Toreplacetheenginefuse,removetheconsolefrom
theplasticfender.
Figure47
1.Enginefuse
3.Grasptheenginefuseandpullitstraightandaway
fromthefuseblock(Figure47).
4.Alignanewfusewiththeslotinthefuseblock(Figure
46).
5.Pushthefuseintothefuseblockuntilthefuseisseated
(Figure46).
DriveSystem
Maintenance
CheckingtheTirePressure
ServiceInterval:Every25hours—Checktirepressure.
Maintaintheairpressureinthefrontandreartiresas
specied.Uneventirepressurecancauseunevencut.Check
thepressureatthevalvestem(Figure48).Checkthetires
whentheyarecoldtogetthemostaccuratepressurereading.
Refertothemaximumpressuresuggestedbythetire
manufactureronthesidewallofthecasterwheeltires.
Inatethereardrivewheeltiresto89.6kPa(13psi).
Figure48
1.Valvestem
37