Toro Titan MX6000 - Premaintenance Procedures; Raising the Seat; Lubrication; Greasing the Bearings

Figure31
1.ReadtheOperator'sManualforinformationonmaintenance.4.Checkthehydraulicoilevery25hours.
2.Checktheengineoilevery8hours.5.Checkthecasterwheeltirepressureevery25hours.
3.Checkthedrivewheeltirepressureevery25hours.
6.Lubricatethecasterwheelevery25hours.
Premaintenance
Procedures
RaisingtheSeat
Makesurethatthemotion-controlleversaretheneutral-lock
positionandparkingbrakeisset.Liftandholdthelever
behindtheseatforwardtodisengagetheseatlatchandthen
lifttheseatforward.
Thefollowingcomponentscanbeaccessedbyraisingtheseat:
•Servicedecal
•Fuses
•Batteryandcables
Lubrication
GreasingtheBearings
ServiceInterval:Every25hours—Greasealllubrication
points.
GreaseType:No.2general-purpose,lithium-basedgrease
1.Parkthemachineonalevelsurfaceanddisengagethe
blade-controlswitch.
2.Movethemotion-controlleversoutwardtotheneutral
position,settheparkingbrake,stoptheengine,remove
thekey,andwaitforallmovingpartstostopbefore
leavingtheoperatingposition.
3.Cleanthegreasettings(Figure31andFigure32)with
arag.Makesuretoscrapeanypaintoffofthefront
ofthetting(s).
29