Toro Titan MX6000 - Page 39

B
A
C D
E
F
3/4
g027477
Figure51
7.Locateandremovetheventplugoneachtransmission
8.Rotatetheltercounterclockwisetoremovethelter;
allowoiltodrainfromdrivesystem.
Repeatthisprocedureforbothlters.
InstallingtheHydraulicSystemFilters
ServiceInterval:Aftertherst50hours
Every400hours
1.Applyathincoatofoilonthesurfaceoftherubber
sealofeachlter(Figure51).
2.Turnthelterclockwiseuntilrubbersealcontactsthe
lteradapterthentightenthelteranadditional3/4
to1fullturn(Figure51).
3.Repeatstep2fortheotherlter.
4.Alignthelterguardsovereachlter;refertostep4of
RemovingtheHydraulicSystemFilters(page38).
5.Securethelterguardswiththe3screwsremovedin
step4ofRemovingtheHydraulicSystemFilters(page
38).Usethe3screwstosecurethelterguards.
6.Addoiltothehydraulicsystemasfollows:
A.Ensurethattheventplugsandreservoircapare
removedbeforeaddingtheoil(Figure49and
Figure50).
B.Slowlypourthespeciedoilthroughexpansion
reservoiruntiloilcomesoutofoneofthevent
plugholesandstoplling(Figure50).
C.Installthatventplug(Figure50).
Note:Torquetheplugto20.3N-m(180in-lb).
D.Addoilthroughtheexpansionreservoiruntiloil
comesoutoftheremainingventplugholeonthe
secondtransmissionandstoplling(Figure50).
E.Installthatventplug(Figure50).
Note:Torquetheplugto20.3N-m(180in-lb).
7.Addoilthroughtheexpansionreservoiruntilitreaches
theFullColdlineontheexpansionreservoirandinstall
thecapforthereservoir(Figure49).
8.Bleedthehydraulicsystem;refertoBleedingthe
HydraulicSystem(page40).
Important:Failuretoperformthe
Bleeding
the Hy draulic System procedureafterchanging
hydraulicltersandoilmayresultinirreparable
damagetothetransaxledrivesystem.
39