Workman MDX Page 3 -- 17 Briggs & Stratton Gasoline Engine
10.Connect the following components (Fig. 13):
A. Choke and throttle cables to the carburetor and
cable bracket.
B. Air intake hose to the air cleaner intake and ma-
chine frame.
11. Install cargo box to the frame (see Cargo Box and
Tailgate Installation in the Service and Repairs section
of Chapter 7 -- Chassis).
12.Connect positive (red) cable to the battery. Then,
connect negative (black) cable to the battery.
13.Make sure engine oil level is correct.
Briggs & Stratton
Gasoline Engine
To Next Page
Loading...
