Toro Workman Topdresser 1800 - Page 24

g011388
Figure32
4.Attherightsideofmachine,loosen2capscrews
thatsecureslider-framerailtotherightfender
(Figure33).Ensurethatthecapscrewsare
looseenoughtoallowsliderbedtip.
g012670
Figure33
1.Capscrews(slider-framerail)
5.Attheleftsideofmachine,remove2capscrews
and2washersthatsecureslider-framerailto
theleftfender(Figure34).
g012671
Figure34
1.Liftingrod2.Capscrews(slider-frame
rail)
RemovingtheBelt
Cutbeltandremoveitfromrollers.
InstallingtheBelt
1.Insertaliftbarthoughtheholeattheleft
slider-framerail,andraisetheliftbartotipframe
railslightly;refertoFigure34inDisassembling
theSliderBed(page23).
2.Assemblethebeltovertheliftbarandrollers
asfaraspossible.
3.Insertaplasticbelttoolbetweeneachrollerand
thebelt.
Rotaterollersuntileachtoolispositionedtothe
outsideofeachroller.Insertthetoolpastribin
thecenterofbelt.
4.Slidebeltandbelttoolsfurtherontorollersuntil
beltiscenteredonrollers.
5.Removebelttools.
6.Alignbeltsothatthebeltribtsintoalignment
groovesineachroller.
AssemblingtheSliderBed
1.Attheleftsideofmachine,assemblethe
slider-framerailtotheleftfender(Figure35)
withthe2capscrewsand2washersthatyou
removedinDisassemblingtheSliderBed(page
23),andtightenthecapscrews.
g012671
Figure35
1.Liftingrod2.Capscrews(slider-frame
rail)
2.Attherightsideofmachine,tighten2capscrews
thatsecureslider-framerailtotherightfender
(Figure36).
24