Toro Z Master 74925TE - User Manual

Toro Z Master 74925TE

72 pages

To Next Page

To Next Page

Loading...

FormNo.3371-133RevA

ZMaster

®

RidingMower

with152cmTURBOFORCE

®

SideDischarge

Mower

ModelNo.74925TE—SerialNo.312000001andUp

ToregisteryourproductordownloadanOperator'sManualorPartsCatalogatnocharge,gotowww.Toro.com.OriginalInstructions(EN)

Table of Contents

Side Discharge1
Table of Contents2
Introduction2
Safety4
- Safe Operating Practices4
- Toro Riding Mower Safety5
- Sound Pressure6
- Sound Power6
- Vibration Level6
- Slope Indicator7
- Safety and Instructional Decals8
Product Overview14
- Controls14
- Specifications15
Operation16
- Adding Fuel16
- Checking the Engine Oil Level17
- Breaking in a New Machine17
- Using the Rollover Protection System (ROPS)17
- Think Safety First18
- Operating the Parking Brake19
- Operating the Mower Blade Control Switch (PTO)19
- Operating the Throttle20
- Operating the Choke20
- Operating the Ignition Switch20
- Using the Fuel Shut-Off Valve20
- Starting and Stopping the Engine21
- The Safety Interlock System22
- Driving Forward or Backward23
- Stopping the Machine24
- Adjusting the Height of Cut24
- Adjusting the Anti-Scalp Rollers25
- Adjusting the Flow Baffle Cam Locks26
- Positioning the Flow Baffle27
- Positioning the Seat27
- Using the Drive Wheel Release Valves28
- Using the Side Discharge28
- Transporting Machines29
- Loading Machines29
- Using the Z Stand30
- Operating Tips31
- Blade Maintenance32
Maintenance33
Recommended Maintenance Schedule(S)33
Lubrication34
- Greasing and Lubrication34
- Where to Grease the Mower34
- Lubricate Caster Wheel Hubs35
Engine Maintenance36
- Servicing the Air Cleaner36
- Servicing the Engine Oil37
  - Changing the Engine Oil38
  - Changing the Engine Oil Filter39
- Servicing the Spark Plug40
- Check Spark Arrester (if Equipped)41
Fuel System Maintenance42
- Replacing the Fuel Filter42
- Servicing the Fuel Tank42
Electrical System Maintenance43
- Servicing the Battery43
  - Installing the Battery44
  - Charging the Battery44
- Servicing the Fuses45
Drive System Maintenance45
- Checking the Seat Belt45
- Checking the Rollover Protection System (ROPS) Knobs45
- Adjusting the Tracking46
- Checking the Tire Pressure46
- Checking the Wheel Hub Slotted Nut47
- Adjusting the Caster Pivot Bearing47
Cooling System Maintenance48
- Cleaning the Engine Screen and Engine Oil Cooler48
- Cleaning the Engine Cooling Fins and Shrouds48
- Check and Clean the Hydraulic Unit Shrouds48
Brake Maintenance49
- Adjusting the Parking Brake49
Belt Maintenance50
- Inspecting the Belts50
- Replacing the Mower Belt50
- Replacing the Hydraulic Pump Drive Belt51
Controls System Maintenance52
- Adjusting the Control Handle Position52
- Hydraulic System Maintenance55
  - Servicing the Hydraulic System55
- Mower Deck Maintenance57
- Cleaning63
  - Cleaning under the Mower63
  - Waste Disposal63
Storage64
- Cleaning and Storage64
Troubleshooting65
Schematics67

Questions and Answers:

W
William TurnerAug 28, 2025
What to do if my Toro Z Master 74925TE Lawn Mower engine loses power?
- R
  Robert KaneAug 28, 2025
  If your Toro Lawn Mower engine is losing power, consider the following: * Reduce the ground speed if the engine load is excessive. * Clean the air-cleaner element. * Add oil to the crankcase if the oil level is low. * Remove any obstructions from the cooling fins and air passages above the engine. * Clean or replace the fuel cap if the vent hole is plugged. * Replace the fuel filter if it is dirty.
V
Victoria PaulAug 27, 2025
Why won't my Toro Z Master 74925TE engine start, starts hard, or fails to keep running?
- S
  Shane CalderonAug 27, 2025
  If your Toro Lawn Mower engine will not start, starts hard, or fails to keep running, fill the fuel tank, open the fuel shutoff valve and add oil to the crankcase. Ensure that the throttle control is midway between the “SLOW” and “FAST” positions. Also, replace the fuel filter, clean or replace the air cleaner element, check the seat switch indicator (replace the seat if needed), check the electrical connections for good contact (clean the connector terminals thoroughly with electrical contact cleaner, apply dielectric grease, and reconnect), clean, adjust, or replace the spark plug and check the spark plug wire connection. If problems persist, contact an Authorized Service Dealer.
P
Patrick WilliamsAug 27, 2025
Why Toro Lawn Mower blades do not rotate?
- J
  jordanpaulAug 27, 2025
  If the blades on your Toro Lawn Mower aren't rotating, it could be due to a worn, loose, or broken mower deck belt; in this case, install a new deck belt. Another possibility is that the mower deck belt is off the pulley; reinstall it and check the idler pulley, idler arm, and spring for correct position and function. Also, check the pump drive belt for wear, looseness, or breakage, and adjust the belt tension or install a new belt. Finally, inspect the idler spring and replace it if it's broken or missing.
J
johnpalmerSep 3, 2025
What causes my Toro Z Master 74925TE engine to lose power?
- L
  Laura RogersSep 3, 2025
  A loss of power in your Toro Lawn Mower engine can stem from several causes. The engine load might be excessive, so reduce the ground speed. Check the air cleaner element; if it's dirty, clean it. Ensure the oil level in the crankcase is sufficient by adding oil if needed. Clear any obstructions from the cooling fins and air passages above the engine, and clean or replace the fuel cap if the vent hole is plugged. Also, replace the fuel filter if it's dirty. For issues like dirt, water, or stale fuel in the fuel system, contact an Authorized Service Dealer.
K
Kimberly MooreSep 5, 2025
What to do if my Toro Z Master 74925TE Lawn Mower machine vibrates abnormally?
- S
  shawchristopherSep 5, 2025
  If your Toro Lawn Mower is vibrating abnormally, it could be due to: * Bent or unbalanced cutting blade(s); install new cutting blade(s). * A loose blade mounting bolt; tighten the blade mounting bolt. * Loose engine mounting bolts; tighten the engine mounting bolts. * A loose engine pulley, idler pulley, or blade pulley; tighten the appropriate pulley.
J
Julie OliverSep 7, 2025
What causes abnormal vibrations in my Toro Z Master 74925TE Lawn Mower?
- Q
  qbaxterSep 7, 2025
  If your Toro Lawn Mower vibrates abnormally, try the following: 1. Install new cutting blade(s). 2. Tighten the blade mounting bolt. 3. Tighten the engine mounting bolts. 4. Tighten the appropriate pulley.
A
Amanda BellSep 18, 2025
What to do if my Toro Lawn Mower overheats?
- E
  Erin TurnerSep 18, 2025
  If your Toro Lawn Mower engine is overheating, it could be due to a few reasons. First, the engine load might be excessive, so try reducing the ground speed. Another cause could be a low oil level in the crankcase, so add oil. Finally, check the cooling fins and air passages above the engine for any obstructions and remove them.
Z
Zachary BentonSep 15, 2025
Why won't my Toro Z Master 74925TE Lawn Mower drive?
- S
  steven91Sep 15, 2025
  If your Toro lawn mower isn't driving, check if the by pass valves are not closed tight and tighten them. Also, inspect the pump belt for wear, looseness, or breakage and change the belt if needed. Ensure the pump belt is on a pulley. Replace any broken or missing idler spring. Lastly, check the hydraulic oil level and add hydraulic oil to reservoirs or let it cool down if it's too hot.
A
Anthony DavisAug 25, 2025
Why is my Toro Z Master 74925TE Lawn Mower resulting in an uneven cutting height?
- J
  Jennifer EllisonAug 26, 2025
  If mowing results in an uneven cutting height with your Toro Lawn Mower, try the following: 1. Sharpen the blade(s). 2. Install new cutting blade(s). 3. Level the mower deck from side-to-side and front-to-rear. 4. Clean the underside of the mower. 5. Adjust the tire pressure.
M
Michael HoffmanAug 25, 2025
How to fix a Toro Z Master 74925TE Lawn Mower when the starter does not crank?
- T
  Tara BergerAug 25, 2025
  If the starter on your Toro Lawn Mower doesn't crank, here are some things to check: 1. Move the blade control switch (PTO) to disengaged. 2. Set the parking brake. 3. Ensure that the drive levers are in the neutral lock position. 4. Sit on the seat. 5. Charge the battery. 6. Check the electrical connections for good contact. 7. Replace the fuse.

Toro Z Master 74925TE Specifications

General

Brand	Toro
Model	Z Master 74925TE
Category	Lawn Mower
Language	English

Related product manuals

Preview: Toro 74923 Z Master 6000

Toro 74923 Z Master 6000

Preview: Z Master Professional 6000 74922

Z Master Professional 6000 74922

Toro Z Master 74915

Toro Z Master 74958

Preview: Toro Z Master 74941CP

Toro Z Master 74941CP

Preview: Toro 74915 Z Master G3

Toro 74915 Z Master G3

Preview: Toro 74901 Z Master 5000

Toro 74901 Z Master 5000

Preview: 74991 Z Master Professional 5000 Series

74991 Z Master Professional 5000 Series

Preview: Toro Z Master 74141

Toro Z Master 74141

Toro 74242 Z500 Z Master

Toro 74408 Z334 Z Master