7-10
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
Table of Contents
DRIVE
Drive System (Cont.)
Removal (Cont.)
21. Disconnect the four hoses connected to the wheel motor from the transmission assembly.
22. Disconnect the case drain hose.
23. Remove the motion control linkage from the transmission.
24. Attach a lift chain to the transmission case by installing two M8 X 1.25 bolts into the open threaded holes in
the top of the transmission case (Figure 10 and 11).
Figure 10
Figure 11
To Next Page
Loading...
