Toro Z Master Professional 7000 Series - Drive System Maintenance; Adjusting the Tracking; Checking the Tire Pressure

DriveSystem
Maintenance
AdjustingtheTracking
Themachinehasaknobforadjustingthetracking
locatedundertheseat.
Important:Adjustthehandleneutraland
hydraulicpumpneutralbeforeadjustingthe
tracking;refertoAdjustingtheControlHandle
NeutralPosition(page65)andSettingthe
HydraulicPumpNeutralPosition(page69).
1.Pushbothcontrolleversforwardthesame
distance.
2.Checkifthemachinepullsto1side.Ifitdoes,
shutoffthemachineandengagetheparking
brake.
3.Unlatchtheseatandtilttheseatforwardto
accessthetrackingknob.
Note:Determinetheleftandrightsidesofthe
machinefromthenormaloperatingposition.
4.Tomakethemachinegoright,turntheknob
towardtherightofthemachine;refertoFigure
77.
5.Tomakethemachinegoleft,turntheknob
towardtheleftofthemachine;refertoFigure77.
6.Repeatadjustmentuntilthetrackingiscorrect.
g001070
Figure77
1.Trackingknob4.Turnthiswaytotrackright.
2.Hydraulictank
5.Turnthiswaytotrackleft.
3.Hydraulicpumps
CheckingtheTirePressure
ServiceInterval:Every50hours/Monthly(whichever
comesrst)
Maintaintheairpressureinthereartiresat90kPa
(13psi).Uneventirepressurecancauseunevencut.
Checkthetireswhentheyarecoldtogetthemost
accuratepressurereading.
Note:Thefronttiresaresemi-pneumatictiresanddo
notrequireairpressuremaintenance.
g001055
Figure78
55