Toro Z Master Professional 7000 Series - Mower Deck Maintenance; Leveling the Mower at 3 Positions; Setting Up the Machine

WARNING
Theelectricalsystemdoesnotperform
propersafetyshutoffwiththejumper
wireinstalled.
•Removethejumperwirefromthe
wireharnessconnectorandplugthe
connectorintotheseatswitchwhen
youcompletetheadjustment.
•Neveroperatethemachinewiththe
jumperinstalledandtheseatswitch
bypassed.
7.Afterbothpumpneutralsareset,shutoffthe
machine.
8.Removethejumperwirefromthewireharness
connectorandplugtheconnectorintotheseat
switch.
9.Installtheseatrodandlowertheseatinto
position.
10.Removethejackstands.
MowerDeck
Maintenance
LevelingtheMowerat3
Positions
Important:Thereareonly3measuringpositions
neededtolevelthemower.
SettingUptheMachine
1.Parkthemachineonalevelsurface,disengage
theblade-controlswitch,andengagetheparking
brake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Checktirepressureofthetires;ifneeded,adjust
to90kPa(13psi).
4.Lowerthemowertothe76mm(3inches)
height-of-cutposition.
5.Inspectthe4chains.
Note:Thechainsneedtohavetension.
Note:Adjusttherearchainstothetopofthe
slot,wheretheyareattachedtothemower.
•Ifarearchainisloose,lower(loosen)the
front-supportarmonthesameside;refer
toAdjustingtheFront-to-RearMowerPitch
(page72).
•Ifafrontchainisloose,raise(tighten)the
front-supportarmforthatchain;referto
AdjustingtheFront-to-RearMowerPitch
(page72).
71