Toro Z Master Professional 7000 Series - Leveling the Mower Side-to-Side; Adjusting the Front-to-Rear Mower Pitch

LevelingtheMowerSide-to-Side
1.Positiontherightbladeside-to-side(Figure
104).
g006888
Figure104
1.Measureherefromblade
tohardsurface
2.MeasureatBandC
2.MeasuretherightbladeattheBlocation,froma
levelsurfacetothecuttingedgeofthebladetip
(Figure104).
3.Recordthismeasurement.Thismeasurement
needstobe80to83mm(3-1/8to3-1/4inches).
4.Positiontheleftbladeside-to-side(Figure104).
5.MeasuretheleftbladeattheClocation(Figure
104),fromalevelsurfacetothecuttingedgeof
thebladetip.
6.Recordthismeasurement.Thismeasurement
needstobe80to83mm(3-1/8to3-1/4inches).
7.IfthemeasurementsatpositionsBorCarenot
correct,loosentheboltattachingtherearchain
totherear-supportarm(Figure105).
g001040
Figure105
1.Rearchain5.Adjustmentbolt
2.Rear-supportarm6.Frontswivel
3.Bolt7.Front-supportarm
4.Jamnut
8.Loosenthejamnutundertherear-support
armandadjusttheadjustmentbolttogeta
measurementof80to83mm(3-1/8to3-1/4
inches);refertoFigure105.
Note:Itisrecommendedthatbothsidesofthe
mowerareadjustedthesamedistance.
9.Tightenthejamnutundertherear-supportarm
andtightentheboltsecuringthechaintothe
rear-supportarm.
10.Adjusttheoppositesideifneeded.
AdjustingtheFront-to-RearMower
Pitch
1.Positiontherightbladefront-to-rear(Figure
106).
72