Toro Z Master Professional 7000 Series - Setting the Left Hydraulic Pump Neutral Position

4.OpenthethrottletoFAST.
Note:Makesurethatthewheelremains
stoppedorslightlycreepsinreverse;adjustif
necessary.
g001070
Figure102
1.Trackingknob4.Turnthiswaytotrackright
2.Hydraulictank
5.Turnthiswaytotrackleft
3.Hydraulicpumps
SettingtheLeftHydraulicPump
NeutralPosition
1.Loosenthelocknutsattheballjointsonthe
pumpcontrolrod(Figure103).
2.Starttheengine,openthethrottle1/2wayand
disengageparkingbrake;refertoStartingand
ShuttingOfftheEngine(page26).
Note:Themotion-controllevermustbein
neutralwhilemakinganyadjustments.
Note:Thefrontnutonthepumprodhas
left-handthreads.
3.Adjustthepumprodlengthbyrotatingdouble
nutsonrod,intheappropriatedirection,until
wheelisstillorslightlycreepsinreverse(Figure
103).
4.Movethemotion-controlleverforwardand
reverse,thenbacktoneutral.Thewheelmust
stopturningorslightlycreepinreverse.
5.Openthethrottletofast.Makesurethatthe
wheelremainsstoppedorslightlycreepsin
reverse,adjustifnecessary.
6.Tightenthelocknutsattheballjoints(Figure
103).
g001066
Figure103
1.Doublenuts4.Locknut
2.Pumprod5.Balljoint
3.Adjustmentbolt6.Pumps
70