8
3. Grease the fittings on the three spindle bearings.
Add grease until it comes out of the lower seals.
m–7420
4. Install the belt covers.
5. Grease the cooling fan belt idler arm.
6. Grease the drive belt idler arms.
m–7416
7. Grease the pump belt idler arm in the front of the
engine.
m–7512
Step
10
Preparing the Side
Discharge Chute
Parts needed for this step:
None
Procedure
Remove the plastic tie holding the side discharge
chute up and lower the chute into place.
To Next Page
Loading...
