9
Step
11
Checking the Machine Before Delivery to the Customer
Parts needed for this step:
None
Procedure
Before delivering the machine to the customer, ensure that you perform or have performed the procedures listed
in the following table and initial each when finished. Refer to the
Operator’s Manual
for instructions on performing
these procedures.
Initial Check Procedure
Check the tire pressure
Check the level of the mower.
Check that all mower spindles are greased.
Check the engine oil level.
Check the hydraulic fluid level.
Check ROPS is secure.
On liquid cooled machines, check the level of the coolant in the radiator.
Check the adjustment of the parking brake.
Ensure that the machine tracks correctly; refer to the
Operator’s Manual
for the adjustment procedure.
Check the safety interlock system; refer to the
Operator’s Manual
.
Ensure that the PTO works.
Check all fasteners you installed to ensure that they are tight.
When you finish setting up the machine, sign and date in the space provided below:
Signature: Date:
To Next Page
Loading...
