Step
15
Delivering the Machine to the Customer
Parts needed for this step:
1
Operator’s Manual
1
Parts Catalog
1
Engine Owner’s Manual
1
Registration Card
1
Safety Video
2 Key
Procedure
At deli v er y , Fill in the model and serial n umber and complete the items listed in the follo wing table
and initial eac h when finished.
Model No. Serial No.
Dealer Initial Customer Initial
Check Procedure
Show the customer where the following features are located and how
they function:
•
Fuel tank caps
•
Oil ll cap/Oil dipstick
•
Spark plug(s)
•
Engine oil lter
•
Engine oil drain
•
Fuel lters
•
Air lter
•
Radiator coolant (if applicable)
•
Hydraulic uid reservoir
•
Hydraulic lter
•
Battery
•
Ignition switch
•
Throttle lever
•
Choke (if applicable)
•
Power take off switch (PTO)
•
Motion control levers
•
Parking brake
•
Mower height-of-cut
•
Lift assist lever (if applicable)
13
To Next Page
Loading...
