Step
Description
Qty.
Use
13
No parts required
–
Add fuel to the machine.
14
No parts required
–
Check the machine before delivery
to the customer.
Operator’s Manual
1
Parts Catalog
1
Engine Owner’s Manual
1
Registration Card
1
Safety Video
1
15
Key 2
Delivering the machine to the
customer.
Step
1
Removing Parts from the
Crate
No Parts Required
Procedure
R emo v e the tires and the par ts for the R OPS from
the shipping crate .
Step
2
Checking the Tire Pressure
No Parts Required
Procedure
Pressure: 13 psi (90 kP a)
1. F or entr y lev el models only , c hec k the air
pressure in the front tires .
Note: If there is no v alv e stem located in the
front tires , then it is a semi-pneumatic tire and
does not need to be c hec k ed.
2. Chec k the air pressure in the rear tires .
Figure 1
Step
3
Raising the Machine Up and
Installing the Drive Wheels
Parts needed for this step:
2
Rear wheels
Procedure
1. R emo v e the screws holding the right angle
retaining plate to the crate ( Figure 2 ).
2
To Next Page
Loading...
