Toro Z500 Series Z Master - Page 7

Figure 15
Step
8
Installing the Air Cleaner on
Kohler Engines
Parts needed for this step:
1
Air cleaner
1
Hose Clamp
Procedure
Note: If the mac hine y ou are setting up does not
ha v e a K ohler engine , skip this procedure .
1. R emo v e the air cleaner from the crate , k ee ping
the brac k et tog ether with it.
2. R emo v e the top 2 v alv e co v er mounting bolts
from both v alv e co v ers ( Figure 16 ).
Figure 16
3. R emo v e the plastic plugs ( Figure 17 ).
Figure 17
4. Align the holes in the air cleaner brac k et with
holes in the v alv e co v ers ( Figure 18 ).
Figure 18
5. Secure the brac k et and v alv e co v ers with the 4
bolts remo v ed previously ( Figure 18 ).
6. T or que the bolts to 70 in-lb (5 N ⋅ m).
7. Install the air cleaner hose o v er the air intak e
elbo w on the engine and secure it with a hose
clamp ( Figure 18 ).
7