Toro Z580-D Z Master 74266 - Page 52

Figure74
1.Cap3.Colduidlevel-full
2.Bafe4.Hotuidlevel-full
Hydraulicuidescapingunderpressurecan
penetrateskinandcauseinjury.
•Ifhydraulicuidisinjectedintotheskin
itmustbesurgicallyremovedwithinafew
hoursbyadoctorfamiliarwiththistypeof
injury.Gangrenemayresultifthisisnot
done.
•Keepbodyandhandsawayfrompinhole
leaksornozzlesthatejecthighpressure
hydraulicuid.
•Usecardboardorpapertondhydraulic
leaks.
•Safelyrelieveallpressureinthehydraulic
systembeforeperforminganyworkonthe
hydraulicsystem.
•Makesureallhydraulicuidhosesand
linesareingoodconditionandallhydraulic
connectionsandttingsaretightbefore
applyingpressuretohydraulicsystem.
ReplacingtheHydraulicFilterandOil
ServiceInterval:Aftertherst25hours—Changethe
hydrauliclter.
Yearly—Changethehydrauliclter
andoil.
Usesummerlterabove32°F(0°C)
Usewinterlterbelow32°F(0°C)
1.DisengagethePTO,movethemotioncontrollevers
totheneutrallockedpositionandsettheparking
brake.
2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
Important:Donotsubstituteautomotiveoil
lterorseverehydraulicsystemdamagemay
result.
3.Applyathincoathydrouidtotherubbergasketon
thereplacementlter(Figure75).
Figure75
1.Hydrauliclter
3.Adapter
2.Gasket
4.Placedrainpanunderlter,removetheoldlter
andwipethelteradaptergasketsurfaceclean
(Figure76).
Figure76
1.Hydrauliclter
5.Ifchangingtheoil,allowthehydraulicoiltodrain
fromthetankwhentheoillterisremoved.
6.Installthereplacementhydrauliclterontothelter
adapter.Donottighten.
7.Fillthehydraulictankwithhydraulicuiduntilthe
uidoverowsthelterandthenturntheoillter
clockwiseuntiltherubbergasketcontactsthelter
adapter,thentightenthelteranadditional1/2turn
(Figure75).
8.Cleanupanyspilleduid.
9.Adduidtothecoldlevelofthebafeinthe
hydraulictank.
52