Torqeedo Cruise 2.0 R/T - Page 63

63
DeutschEnglish
Connecting of Cruise 2.0 T
Step 4: connection
of high current
plug
Step 2: switch main
switch of cable set to
“OFF”
Step 1:
connection of data cable
(plug beneath tiller)
Step 3: connection of
positive and nega-
tive terminal posts
(see positive and
negative polarity on
imprint on battery
and terminal posts)
negative terminal
post
data socket
positive terminal
post
Please be aware that you need to establish communication between outboard and
battery as described in chapter 5.3.1.1.
Notes:
• Adaptercableset/Powerbatteryisprovidedwitha125Afuse.Incaseofshortcircuits,
fuse will cut the electrical circuit to prevent further damage.
• YoumayalsoconnectseveralPower26-104toyouroutboard.Moreinformationplease
find in operating manual of Power 26-104.
black cable: negative
red cable positive