Page 2
ITM-MAGMETER-T500-ED2
Contents
1. GENERAL INFORMATION
2. FLOW RANGES OF INDIVIDUAL SIZES
3. TECHNICAL PARAMETERS
4. IMPORTANT
5. LOCATION
6. ELECTRIC CONNECTIONS
7. INSTRUMENT START
8. INSTRUMENT CONFIGURATION
A. MENU OPTIONS, COMMANDS
B. MULTIFUNCTIONAL OUTPUTS
B1st. PULSE SETTING
B2nd. STATUS REPORT SETTING
B3rd. EXAMPLES OF STATUS REPORTS
C. ANALOGUE OUTPUT
D. DISPLAY (UNITS, DECIMAL PLACES)
E. DAMPING OF SUDDEN CHANGES OF FLOW
F. DEAD BAND SETTING (INSTRUMENT ZERO SETTING)
G. DATALOGGER SETTING
G1st. WITHOUT TIME MASK
G2nd. WITH TIME MASK (USING REAL TIME)
G3rd. EXAMPLES OF TIME MASK SETTING
G4th. DATALOGGER SUBMENU
H. FUNCTION OF THE THIRD ELECTRODE
I. PASSWORD SETTING
J. GSM MODULE ACTIVATION
To Next Page
Loading...