14
Automatic station presetting with the built-in Tuner
Automatic station presetting with the built-in Tuner
Perform this feature to search for and store new analogue and digital TV programmes after the
Automatic installation (see page 10).
Preparation:
Make sure your antenna is connected to the aerial input (see page 9). Select ATV or DTV (see
page 11), then press MENU SETUP or DIGITAL MENU .
1
Press to select “Channel“, then press ENTER/CH LIST .
2
Select “Auto Tuning”, then press ENTER/CH LIST .
3
Select “Country”, then press to select your
country.
4
Select “Start”, then press ENTER/CH LIST .
The automatic tuning will search for available
broadcasts and should store the channels in the
correct order. During the search the sound is muted.
When all programmes have been stored, the normal
TV screen will appear.
To Next Page
Loading...
Need help?
General
