Toshiba 28 Series - Connecting External Equipment; Rear Connections; Recommended SCART Usage

6
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is is no switch
remove the mains plug from the wall socket.
IN
OUT
IN
OUT
the back of your television
video recorder
decoder*
SATIN/OUT
VCR
TV
SCART 2 (EXT2)
SCART 1 (EXT1)
A wide variety of external equipment can be
connected to the back of the television, therefore
the relevant owners manuals for all additional
equipment must be referred to.
We recommend SCART 1 for a decoder, SCART 2 for a
VCR and Input 3 for additional equipment.
If connecting S-VIDEO equipment, set the INPUT for
EXT2. See page 16.
If the television automatically switches over to monitor
external equipment, return to normal television by
pressing the desired programme position button.
To recall external equipment, press
B
to select
between EXT1, EXT2 and EXT3.
WE RECOMMEND THAT YOU USE SCART LEADS IN
ADDITION TO AERIAL CABLES WHEREVER
POSSIBLE
Aerial cables:
Connect the aerial to the socket on the rear of the
television. If you use a decoder* and/or a video
recorder it is essential that the aerial cable is connected
through the decoder and/or through the video
recorder to the television.
SCART leads:
Connect the video recorder IN/OUT socket to the
television. Connect the decoder television socket to
the television. Connect the video recorder SAT socket
to the decoder VCR socket.
Before running Auto tuning put your decoder and
video recorder to Standby.
*
a decoder could
be Digital Satellite,
Free to Air or any
other compatible
decoder.
☛