When your VCR signal is found, press
R
to move
along to Station. With
P
, Q,
S
and
R
put in
the required Name, e.g. VCR.
10
Manual tune continued
Programme skip
This television has direct channel entry
if the channel numbers are known.
Select the Manual Tuning screen in Step 5. Enter
the Programme number, the System, then the
Channel number. Press OK to store.
8
Press OK to store.
Repeat for each programme position you want
to tune or, press MENU to return to the list of
channels and select the next number to tune.
Press EXIT when you have finished.
To name external equipment, e.g. VCR on EXT2,
press
B
to select EXT2, then select Manual
setting from the SET UP menu.
Press
R
to select Label then using
P
, Q,
S
and
R
put in the required characters.
10
11
12
13
9
P
LEASE N
OTE
Press MENU and repeat from Step 2 or press
EXIT.
Each programme position has to be individually
selected. To turn Programme skip off, repeat the
procedure for each position.
Skipped programme positions cannot be selected
by P
f
(
P
) and P
e
(Q) or by the controls on the
front of the television, but can still be accessed by
the number buttons on the remote control.
3
4
5
Use
P
or Q to highlight the programme position
to be skipped and press OK or
R
to select.
Press
R
to select Programme skip.
Use
P
or Q to turn Programme skip on. Press
OK to store.
*
on the screen indicates a skipped programme
position.
To prevent certain programmes from being viewed, the
programme position can be skipped. The remote control must
be removed as the channels will still be available using
P
and Q
. The television can then be watched as normal
using the controls on the front, but the television will not show
the skipped programme position.
Programme skip
Select Manual Tuning from the Set up menu.
1
2
OK : To select
EXIT : To exit
Manual tuning
Prog. Channel Station
0 60 VCR
1 22 BBC1
2 28 BBC2
3 25 ITV
4 32 CH4
5 * 69
OK : To store
MENU : To return
EXIT : To exit
Manual tuning
OK : To store
MENU : To return
EXIT : To exit
Manual setting
OK : To store
MENU : To return
EXIT : To exit
Manual tuning
Label
EXT2 A VCR
Station
0 39 0 VCR
Programme skip :ON
0
*
22 0 BBC1