13
Analogue programme skip,
programme sorting
Manual tuning
Prog. Sys. Channel Station
0 I C60 VCR
1 I C22 BBC1
2 I C28 BBC2
3 I C25 ITV
4 I C32 CH4
5 I C69
OK
Select
MENU
Back
EXIT
Watch TV
Press MENU and repeat from Step 2 or press
EXIT.
Each programme position has to be individually
selected. To turn Programme skip off, repeat the
procedure for each position.
Skipped programme positions cannot be selected
by P
f
and P
e
or by the controls on the top of
the television, but can still be accessed by the
number buttons on the remote control.
3
4
5
Use
P
or Q to highlight the programme position
to be skipped and press OK to select.
Press
R
to select Programme skip.
Use
P
or Q to turn Programme skip on.
Press OK.
on the screen indicates a skipped
programme position.
To prevent certain programmes from being viewed, the
programme position can be skipped. The remote control
must be removed as the channels will still be available using
th number buttons
. The television can then be watched as
normal using the controls on the top, but the television will
not show the skipped programme position.
Programme skip
Select Manual tuning from the SET UP menu.
1
Programme sorting
is an easy way of storing each
channel on the programme position of your choice, or
changing the station order if the picture is not clear.
Sorting programme positions
Select Programme sorting from the SET UP
menu.
With the list of stations now showing use Q or
P
to highlight the station you want to move and
press
R
.
The selected station will be moved to the right of
the screen.
1
2
Manual tuning
Programme skip : On
1 I A C 22 0 B B C 1
OK
Store
MENU
Back
EXIT
Watch TV
2
3
4
Use Q or
P
to move through the list to your
preferred position. As you do so the other stations
will move to make room.
Press
S
to store your move.
Repeat as necessary, then press EXIT.
Programme sorting
Prog. Channel Station
1 C22 BBC1
2 C28 BBC2
3 C25 ITV
4 C32 CH4
5 C69
6 C69
Sort Store
MENU
Back
EXIT
Watch TV
To Next Page
Loading...
