19
Picture controls continued
Press
P
and Q to select an option, then
R
to
adjust the settings.
2
In the PICTURE menu press
Q
to select
Base colour adjustment, then press OK.
1
The Base colour adjustment feature allows the
adjustment of individual colours to suit personal
preference. This can be useful when using an
external source.
Base colour adjustment
PICTURE
Picture settings
OK
Colour management
On
Basic colour adjustment
OK
Cinema mode
Off
MENU
Back
EXIT
Watch TV
PICTURE
Picture settings
OK
Colour management
On
Basic colour adjustment
OK
Cinema mode
Off
MENU
Back
EXIT
Watch TV
When Colour management is selected it allows the Base
colour adjustment feature to become available.
Colour management
In the PICTURE menu press
Q
to select Colour
management.
Press
S
or
R
to select On or Off.
1
2
To return to the original factory settings select
Reset and press OK.
Base colour adjustment
Hue Saturation
Red +2 +6
Green 0 0
Blue 0 0
Yellow 0 0
Magenta 0 0
Cyan 0 0
Reset
OK
MENU
Back
EXIT
Watch TV
In the PICTURE menu press
Q
to select Cinema
mode.
Press
S
or
R
to select On or Off.
1
2
If there are lines or jagged edges in the film or programme
being viewed, selecting Cinema mode can help correct
this by smoothing out the picture.
Cinema mode – analogue only
1/2
If the signal being received by the television is too strong,
this may result in picture interference and/or buzzing
sound. Setting Antenna Amplifier to Off reduces the
signal strength, and can help to remove the interference.
In the SET UP menu press
Q
until Antenna
Amplifier is highlighted.
With
S
or
R
select either On or Off.
Antenna amplifier
1
2
SET UP
Language English
Country UK
Auto tuning
OK
Manual tuning
OK
Programme sorting
OK
Antenna Amplifier On
MENU
Back
EXIT
Watch TV
To Next Page
Loading...
