Toshiba 43HX71 - Changing the On-Screen Display Language; Sdecting the Antenna Input

2. Press• or• tohighlightLANGUAGE.
®@@®@®
_SET UP
ANTIf2 ANT_
TV/CABLE CABLE
CH PROGRAM
ADD/ERASE ADD
3. Press _ or _ to highlight your desired language.
Selecting the antenna input
You can connect to two different antenna input sources (kaNT I or
ANT 2).
To select the antenna input using the menu system:
1. Press MENU, and then press 4 or P" to highlight the SET UP
menu.
2, Press • or • to highlight kaNT 1/2.
®®@®®®
SET UP
CH PROGRAM
ADD/ERASE ADD
3. Press "_ or P" to highlight either ANT 1 or ANT 2, depending on
the antenna terminal you wish to use.
To select the antenna input using the INPUT or TV/VIDEO button:
1. Press INPUT on the remote control or TV/VIDEO on the TV
(see illustrations below). The current signal source displays in
purple.
2. Continue pressing the INPUT or TV/VIDEO button to select
ANT 1 or ANT 2.
53HX71
MENU ,I,_r_ I_
I=o,I:®
IV ®
:®®®
INPUT
43HX71
H. ....
TV/VIDEO
ill!li!!iii_!ii_i!liii)}
SOURCE SELECT{ON
O: ANT I
!:V_DEO
2:V_DEO
3:VIDEO 3
4: olorS ream HD1
5:_o orStream HD2
6: ANT 2
0-6:TO SELECT
PresslhgINPUTonthe remotecontrol
the currentsignalsource
(pressINPUTagainor 0-6 tochang_
SOURCE SELECTION
ANT 1
VIDEO 1
VIDEO 2
VIDEO 3
Co(orgtream Hbt
ColarStream HD2
ANT 2
TVIVIDEO:TO SELECT
Pressing7V/VIDEOonthe TV
chang_ thecurrentsignalsource
53HX71
t_E U _X_T TWVlD_OTO'OCHE)C_)S
TV/VIDEO