Toshiba 50L9450 Series - Page 20

20
C. Colour System (
-
page 70)
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
If the colour of a certain channel is abnormal,
the automatic colour system selection (A)
may have malfunctioned, or sound system
selection is wrong. In such a case, select
another colour and/or sound system (
-
page 70).
D. Position skip selection
Press

or

to turn the position skip option
on “
8
” or o “
(
”. The position will then be
skipped when you select channels with P
U
or P
u
. The “
8
” mark will appear beside a
position number when you use the Number
button on the remote control.
E. Signal Class
The channel classi cation.
F. Channel
The channel number on which a station is
being broadcast.
G. Channel search operation
Press

to search up the band or

to search
down the band.
Press

or

repeatedly until your desired
channel is displayed.
When a station is found, it will be displayed.
NEVER PRESS ANY OTHER BUTTONS WHILE
THE SET IS TUNING.
H. Manual Fine Tuning
Press

or

until better picture and sound
are obtained.
I. Signal Booster
If the receiving signal is weak/strong and the
picture is noisy, the picture may be improved
when using this function.
Press the

or

to turn the Signal Booster
On or O .
J. Label
Station labels appear under the programme
position display each time you turn on the TV,
select a channel, or press .
T
o change or create station labels:
1) Press

or

repeatedly to select a
character for the  rst space, then press

or

.
(blank space)
2) Repeat step 1) to enter the rest of the
characters. If you would like a blank space
in the label name, you must choose a blank
space from the list of characters.
Press OK to store your settings.
Sorting positions
TV channels may be moved and stored to the
position of your choice.
1 From the SETUP menu, press  or  to select
ATV Manual Tuning.
2 With the list of channels now showing, press 
or  to select the channel you want to move
and press .
ATV Manual Tuning
Pos.
0
1 ABCD
2 EFGH
3 IJKL
MNOP
4
5
6
7
Label
3 Use  or  to move through the list to your
preferred position. As you do so, the other
channels will move to make room.
4 Press  to store your move.
• Repeat as necessary, and then press EXIT.
Using the TV’s features
506584L9450SeriesEn.indd20506584L9450SeriesEn.indd20 2014/08/2114:23:452014/08/2114:23:45