Toshiba 50L9450 Series - Selecting the Video Input Source to View

37
4 Press  or  to select Primary Subtitle
Language or Secondary Subtitle Language
and press  or  to select an option.
The SUBTITLE button can be used to select subtitle
on or o for the current channel only and to select
the subtitle language if more than one subtitle is
available.
Audio languages
This feature allows a programme or  lm to be
viewed with a choice of sound track language,
provided multiple language tracks are being
broadcast.
1 From the Subtitle and Audio menu, press 
or  to select Primary Audio Language or
Secondary Audio Language and press  or 
to select an option.
If more than one sound track is available, use
the
s
button to select between them.
Local Time Setting
The clock that is displayed while watching the TV
can be set to display time information acquired
via the internet or time information acquired via a
digital broadcasting signal.
• When purchased, the TV displays time information
acquired via the internet.
1 From the DTV Settings menu, press  or  to
select Local Time Setting and press OK.
2 Press  or  to select Enable DTV Clock and
use  or  to select On.
This changes the time displayed when watching
the TV to the time received via the digital
broadcasting signal. The time received by the
DTV Clock is displayed.
If the time needs to be adjusted according
to the area in which you live, perform the
following procedure.
3 Press  or  to select O set and use  or 
to adjust the time.
The time can be adjusted in 30 minute
increments. The adjusted time is displayed in
Display Clock.
NOTE:
When Enable DTV Clock is set to On, the time that is
displayed on the information screen, the Guide screen
and other screens when watching the TV is the time
received via the digital broadcasting signal.
All timers operate according to time information
acquired via the internet.
Signal Booster
Set the DTV Signal Booster.
1 From the DTV Settings menu, press  or  to
select Signal Booster and press OK.
The Signal Booster screen appears, and the
signal strength of each channel is displayed in
a bar.
2 Press  or  to select a channel to set the
Signal Booster for.
3 Press RED button.
Switch between On and O for the Signal
Booster setting for the selected channel.
Repeat steps 2 and 3 to set Signal Booster for
each channel.
Selecting the video input source to view
1 Press o on the remote control until the video
input mode list appears on the screen, then
press ,  or o to select appropriate input
source (or touch p / o and U or u on the TV
left side panel to select required input source
directly).
TV
Inputs
VIDEO1
VIDEO2
HDMI 1
HDMI 3
HDMI 2
PC
2 Press OK.
VIDEO1 (o (1), COMPONENT/VIDEO INPUT,
standard or component video input) ,
VIDEO2 (o (2), standard video input),
HDMI1, HDMI2 HDMI 3 (HDMI input),
PC (o RGB/PC, PC input)
NOTE:
If the Inputs list is displayed by pressing p / o and U
or u on the left side of the TV and U or u, the options
are DTV / VIDEO (1, 2) /HDMI (1, 2, 3) /ATV.
Using the TV’s features
506584L9450SeriesEn.indd37506584L9450SeriesEn.indd37 2014/08/2114:23:482014/08/2114:23:48