Toshiba 50L9450 Series - Setting the Colour System; Labelling Video Input Sources; Channel List (for ATV); Confi Rming Software Version

38
Setting the Colour System
This feature is available in Standard video
(composite) inputs mode.
1 Press MENU, and then press  or  to display
the SETUP menu.
SETUP
Singapore
Home
Country
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Quick Setup
Location
Auto Colour System
2 Press  or  to select Colour System, and
then press  or  to select Auto, PAL, SECAM,
NTSC 4.43 or NTSC 3.58.
3 Press OK to store your settings.
NOTE:
Con rm that Colour System is set to “Auto”. If not,
select “Auto” with  or .
Labelling video input sources
These input labels are shown in the input selector.
You can label external inputs according to the
devices you have connected to the TV.
1 From the PREFERENCES menu, press  or 
to select AV Connection and press OK.
2 Press  or  to select Input Labelling and
press OK.
Input
Label
--
--
--
--
--
Input Labelling
EXT 1
EXT 2
HDMI 1
HDMI 2
--
HDMI 3
PC
3 Press  or  to select the item you want to
label and press  or  to select --, Ampli er,
Cable, DVD, Game, PC, Recorder, Satellite or
VCR, or press the RED button to turn on the
skip.
4 Repeat step 3 for other video inputs.
Channel List (for ATV)
1 Press LIST. The Channel List will appear.
Channel List
2
3
4
5
6
7
8
1
2 Press  or  to select a channel, and then
press OK.
Con rming software version
For ATV
1 From the SETUP menu, press  or  to select
System Information and then press OK.
2 Press OK to display the software version.
NOTE:
The software version displayed is just for the
illustration.
For DTV
This feature can be used to check the version of
software currently installed. When in DTV mode,
it includes additional diagnostic information such
as signal strength, signal quality, centre frequency,
modulation, etc
1 From the SETUP menu, press  or  to select
System Information.
2 Press OK to display the Boot Code Version and
APP SW Version..
System Information
WEAK
CH22
GOOD
GOOD
GOOD
STRONGAVERAGE
TOSHIBA 2014
ID : XX
Boot Code Version: XXXX.XXXX.XXXX
APP SW Version: XXXXXX
CH25
CH16
CH11
GOOD
3 For information about the signal quality of a
particular multiplex, press  or  to select that
multiplex.
4 Press OK for a screen showing detailed technical
information about the selected multiplex.
Using the TV’s features
506584L9450SeriesEn.indd38506584L9450SeriesEn.indd38 2014/08/2114:23:492014/08/2114:23:49